SUMMARY OF QUALIFICATIONS
- Extensive research experiences, knowledge, and skills in the fields of polymer processing (extrusion, compounding, injection molding, and foaming), polymeric materials, characterization, manufacturing engineering, and quality engineering
- Specialized research skills in extrusion screws and dies, continuous vulcanization processes, wire & cable manufacturing processes, nanocomposites, Computational Fluid Dynamics simulation, rheological behaviour, viscoelasticity, thermophysical properties, supercritical fluid processing, and statistical analysis/optimization
- Exemplary research skills ensuing in many refereed publications
- Strong interdisciplinary research experience from educational and professional backgrounds
- Strong entrepreneurship experience from a multinational corporation with annual sales of $3.3 billion and over 4,000 employees worldwide
- Experience as a technical consultant and successful execution of professional projects
- Assertive problem solving team worker with demonstrated leadership, organizational and management skills
ACADEMIC QUALIFICATIONS
2021~2022 | Master of Data Science, MDS Vancouver, University of British Columbia, Canada Capstone Project: “Modeling Heat Exchanger Units to Optimize Cleaning Schedules” (Project Partner: Suncor Energy Inc., Canada) |
2004~2009 | Ph.D. in Mechanical Engineering, Department of Mechanical and Industrial Engineering, University of Toronto, Canada Thesis: “Development of Advanced Structural Foam Molding Technology for the Production of Fine-Celled Foams with a Class A Surface” (Supervisor: Prof. Chul B. Park) |
2002~2004 | Master’s Degree in Mechanical Engineering, Department of Mechanical and Industrial Engineering, University of Toronto, Canada Thesis: “Extrusion Processing for Manufacture of Low-Density Microcellular Polycarbonate Foams Using CO2” (Supervisor: Prof. Chul B. Park) |
1998~2002 | Bachelor’s Degree in Mechanical Engineering (Mechatronics Option), Department of Mechanical and Industrial Engineering, University of Toronto, Canada |
RESEARCH EXPERIENCE
2009~Present | Principal Research Engineer, R & D Center, LS Cable & System Ltd, South Korea Multiple research projects related to development of advanced extrusion screw/die design, optimization of extrusion/compounding/foaming/injection molding/vulcanization processes of polymer and rubber, processing of halogen-free flame retardant composites materials, CFD numerical simulation study, statistical analysis and optimization, advanced polymeric material characterization, and AI-based smart data analysis system |
2004~2009 | Research Assistant (Doctoral Level), Microcellular Plastics Manufacturing Laboratory, University of Toronto, Canada Multiple research projects related to foam injection molding, foam extrusion, micro-/nano-cellular foaming, foam morphology and density control, supercritical fluid processing to support Decoma International, Canada, GE Plastic (currently Sabic), USA, Kabelwerk Eupen AG, Belgium, and Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Canada |
2002~2004 | Research Assistant (Master Level), Microcellular Plastics Manufacturing Laboratory, University of Toronto, Canada Research projects related to the development of a continuous manufacturing technology of Polycarbonate microcellular foams to support Furukawa Electric, Japan |
HONORS AND ACHIEVEMENTS
2021~2022 | Sponsorship for Study-Abroad Program, LS Cable & System Ltd. Full support to study abroad for up to one year : Successfully finished 10-month accelerated Data Science program at the University of British Columbia |
2019 | Expertise Award, LS Cable & System Ltd. Corporate’s top R&D Award given to the top performer in R&D Sector |
2018 | Expertise Award, LS Cable & System Ltd. Corporate’s top R&D Award given to the top performer in R&D Sector |
2016 | R&D Award, LS Cable & System Ltd. |
2011 | R&D Award, LS Cable & System Ltd. |
2008 | Best Paper Award, Society of Plastics Engineers – Korean American Scientists and Engineers Group, Milwaukee Title : Effect of Cavity Pressure Profile on the Injection-Molded HDPE Structural Foams |
2006~2008 | Ontario Graduate Scholarship, Canada |
2006 | Best Paper Award, Society of Plastics Industry – Plastic Parts Innovations Conference, Columbus Title : Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding |
2005~2006 | Ontario Government Scholarship for Science and Technology/Dupont Scholarship, Canada |
2003~2005 | University of Toronto Open Fellowship Award, University of Toronto, Canada |
2003 | 3rd Prize in the Poster Competition, 5th Annual Industry-University Night, Ontario Section of Society of Plastics Engineers (SPE) Title: Extrusion of Microcellular Polycarbonate Foam |
TEACHING EXPERIENCE
2019 | Instructor, Chemical Market Research Inc. (CMRI), South Korea Plastic Processing Technology Lecture Series: Polymer Processing in Wire & Cable Manufacturing Processes |
2013~2019 | Instructor, Center for Nano-Structured Polymer Processing Technology (CNSPPT), South Korea Extrusion Short Course: Troubleshooting in Extrusion |
2014~2016 | Instructor, LS Cable & System Ltd. Internal Course, South Korea Extrusion and Compounding in Wire & Cable |
2013 | Instructor, Superior Essex, United States Fundamentals in Extrusion: Introduction to Rheology, Application of CAE Software in Polymer Processing, Screw Design, Extrusion Tool Design, Polymer Processing in Wire & Cable Processes, and Troubleshooting in Extrusion |
2004~2008 | Teaching Assistant, Department of Mechanical and Industrial Engineering, University of Toronto, Canada Courses: Manufacturing Engineering, Design and Computer Aided Engineering |
PUBLICATIONS
REFEREED JOURNAL PAPERS
- Lee, J.W.S., Lee, R.E., Wang, J., Jung, P.U., and Park, C.B., “Study of the Foaming Mechanisms Associated with Gas Counter Pressure and Mold Opening Using the Pressure Profiles”, Chemical Engineering Science, 167, 105-119, 2017.
- Kim, S.G., Lee, J.W.S., Park, C.B., and Sain, M., “Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam Blown with Nitrogen“, Journal of Applied Polymer Science, 118, 1691-1703, 2010.
- Lee, J.W.S., Wang, J., Yoon, J.D., and Park, C.B., “Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding”, Industrial & Engineering Chemistry Research, 47, 9457-9464, 2008.
- Wong, S., Lee, J.W.S., Naguib, H.E., and Park, C.B., “The Effect of Foam Morphology on Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams”, Macromolecular Materials & Engineering, 293, 605-613, 2008.
- Xu, X., Park, C.B., Lee, J.W.S., and Zhu, X., “Advanced Structural Foam Molding Using a Continuous Polymer/Gas Melt Flow Stream”, Journal of Applied Polymer Science, 109, 2855-2861, 2008.
- Lee, P.C., Li, G., Lee, J.W.S., and Park, C.B., “Improvement of Cell Opening by Maintaining a High Temperature Difference in the Surface and Core of a Foam Extrudate”, Journal of Cellular Plastics, 43, 431-444, 2007.
- Lee, J.W.S., Park, C.B., and Kim, S.G., “Reducing Material Costs with Microcellular/Fine-Celled Foaming”, Journal of Cellular Plastics, 43, 297-312, 2007.
- Lee, J.W.S., and Park, C.B., "Use of Nitrogen as a Blowing Agent for the Production of Fine-Celled High-Density HDPE Foams", Macromolecular Materials & Engineering, 291, 1233-1244, 2006.
- Lee, J.W.S., Wang, K.H., and Park, C.B., "Challenge to Extrusion of Low-Density Microcellular Polycarbonate Foams Using scCO2", Industrial & Engineering Chemistry Research, 44, 92-99, 2005.
REFEREED CONFERENCE PAPERS
- Lee, J.W.S., Shin, J.W., Choi, Y.J, Lee, S.H., and Cha, K.H., “Use of Pressure and Temperature Profile Inside an Extruder for Optimizing/Troubleshooting Extrusion Processes”, SPE, ANTEC, Technical Papers, Paper# T12-134, Orlando, FL, May 7-11, 2018.
- Kuboki,, T., Lee, J.W.S., Park, C.B., and Sain, M., “Mechanical Properties of Cellulose Fiber Reinforced Polypropylene Composite Foams”, Canadian Society for Mechanical Engineering Forum, Victoria, BC, June 7-9, 2010
- Kuboki, T., Koyama, R., Lee, J.W.S., Park, C.B., Zhang, J., Wu, Q., and Sain, M., “Extrusion Foaming of Cellulose Fiber Reinforced Polypropylene Composite”, 2009 AlChe Annual Meeting Conference Proceedings, Nashville, TN, November 8-13, 2009
- Lee, J.W.S., Jung, P.U., Wang, J., and Park, C.B., “Challenge to the Production of Structural Foams Using High Molecular Weight Polypropylene”, FOAMS 2009, pp 283-290, Iselin, New Jersey, September 16-17, 2009.
- Lee, J.W.S., Jung, P.U., Moon, Y.R., and Park, C.B., “Comparison of the Predicted and Actual Cell Densities in Structural Foam Molding”, SPE, ANTEC, Technical Papers, Paper #0771, Chicago, IL, June 22-24, 2009.
- Kuboki, T., Lee, J.W.S., Park, C.B., and Sain, M., “Foam Injection Molding of Cellulose Fiber Reinforced Polypropylene Composites”, SPE, ANTEC, Technical Papers, Paper #0713, Chicago, IL, June 22-24, 2009.
- Jung, P.U., Lee, J.W.S., Moon, Y.R., and Park, C.B., “The Effects of the Processing Parameters of Injection Foam Molding on Glass-Fiber Reinforced Polypropylene”, SPE, ANTEC, Technical Papers, Paper #0427, Chicago, IL, June 22-24, 2009.
- Kuboki, T., Lee, J.W.S., Park, C.B., and Sain, M., “Injection Molding and Mechanical Properties of Cellulose Fiber Reinforced Polypropylene Composite Foams”, 10th International Conference on Wood & Biofiber Plastic Composites, Madison, Wisconsin, May 11-12, 2009.
- Kuboki, T., Koyama, R., Lee, J.W.S., Park, C.B., Zhang, J., Wu, Q., and Sain, M., “Cellulose Fiber Reinforced Polypropylene Composite Foams in Extrusion”, 4th Wood Fibre Polymer Composites International Symposium, Bordeaux, France, March 30-31, 2009.
- Lee, J.W.S., Wang, J., Kim, S.G., Yoon, J.D., and Park, C.B., “Development of Structural Foams with a Class-A Surface Using Gas Counter Pressure and Mold Opening”, Canadian Society of Mechanical Engineers (CSME) 2008, Paper #, Ottawa, ON, June, 2008.
- Wong, S., Lee, J.W.S., Naguib, H.E., and Park, C.B., “Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foam”, SPE, ANTEC, Technical Papers, Paper #0663, Milwaukee, WI, May 4-6, 2008.
- Lee, J.W.S., Wang, J., Yoon, J.D., and Park, C.B., “Effect of Cavity Pressure Profile on the Cell Morphology of the Injection-Molded HDPE Structural Foams”, SPE, ANTEC, Technical Papers, Paper #0542, Milwaukee, WI, May 4-6, 2008.
- Wang, J., Lee, J.W.S., Yoon, J.D., and Park, C.B., “Challenge to the Foaming of a Thin-Wall Injection Molded Part: Influence of Injection Speed and Gate Geometry”, SPE, ANTEC, Technical Papers, Paper #0538, Milwaukee, WI, May 4-6, 2008.
- Zhu, Z., Wang, J., Lee, J.W.S., and Park, C.B., “Numerical Analysis of Cell Growth During Filling and Post-Filling Stages in Injection Foam Molding”, SPE, ANTEC, Technical Papers, Paper #0599, Milwaukee, WI, May 4-6, 2008.
- Kuboki, T., Lee, Y.H., Lee, J.W.S., Zhu, W., Park, C.B., and Sain, M., "Effects of Clay Dispersion on Mechanical Properties and Flammability of Foamed High-Density Polyethylene/Clay Nanocomposites”, SPE, ANTEC, Technical Papers, Paper # 0448, Milwaukee, WI, May 4-6, 2008.
- Lee, J.W.S., Wang, J., Kim, S.G., Yoon, J.D., and Park, C.B., “Advanced Structural Foam Molding of Various PP with Gas Counter Pressure and Mold Opening”, Polymer Foams 2007, Newark, NJ, October 2-3, 2007.
- Park, C.B., Lee, J.W.S., and Wang, J., “Advances in Structural Foam Molding Technology”, UKC, Korean-American Scientists and Engineers' Conference, paper#982, Washington DC, August 9-12, 2007.
- Wang, J., Lee, J.W.S., Yoon, J.D., and Park, C.B., “Manufacturing of Thin-Walled Parts Using a Microcellular Injection Molding System”, Polymer Processing Society 2007 Regional Meeting, Shanghai, China, July 12-14, 2007.
- Lee, J.W.S., Wang, J., Yoon, J.D., and Park, C.B., “Achievement of Uniform Cell Structure and High Void Fraction in Advanced Structural Foam Molding”, Rapra, Blowing Agents and Foaming Processes 2007, Frankfurt, Germany, May 22-23, 2007.
- Lee, J.W.S., Wang, J., Park, C.B., and Tao, G., “Use of Injection Speed Profile to Achieve A Uniform Void Fraction Distribution in Injection Molded Structural Foams”, SPE, ANTEC, Technical Papers, Paper #304236, Cincinnati, OH, May 6-10, 2007.
- Kim, S.G., Lee, J.W.S., Park, C.B., and Sain, M., "Strategies for Enhancing Cell Nucleation of Thermoplastic Polyolefin (TPO) Foam”, SPE, ANTEC, Technical Papers, Paper #304101, Cincinnati, OH, May 6-10, 2007.
- Lee, J.W.S., Wang, J., Park, C.B., and Tao, G., “Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding”, SPI, Plastic Parts Innovations Conference, Memphis, Tennessee, April 1-3, 2006.
- Lee, J.W.S., and Park, C.B., “Could We Reduce Costs by Foaming?”, FOAMS 2006, Paper#15, Elk Grove Village (Chicago), USA, September 13-14, 2006.
- Lee, J.W.S., Kim, S.G., and Park, C.B., "Cell Nucleation and Growth Behaviors of Polypropylene Foams Blown with Nitrogen”, Polymer Processing Society-22, Paper#99, Yamagata, Japan, July 2-6, 2006.
- Lee, P.C., Li, G., Lee, J.W.S., and Park, C.B., “Improvement of Cell Opening by Maintaining a High Temperature Difference in Surface and Core of a Foam Extrudate”, CSME Forum 2006, Alberta, Canada, May 21-24, 2006.
- Lee, J.W.S., and Park, C.B., “Fine-Celled Foaming of HDPE Using Nitrogen”, SPE, ANTEC, Technical Papers, Paper #103906, Charlotte, NC, May 7-11, 2006.
- Lee, P.C., Li, G., Lee, J.W.S., and Park, C.B., “Extruded Open-Cell Foams Using Amorphous Polymers”, SPE, ANTEC, Technical Papers, Paper #104073, Charlotte, NC, May 7-11, 2006.
- Park, C.B., Xu, X., Lee, J.W.S., and Zhu, X., “Investigations on Advanced Structural Foam Molding Using a Continuous Polymer/Gas Melt Flow Stream”, SPI, Plastic Parts Innovations Conference, Columbus, Ohio, April 2-4, 2006.
- Lee, J.W.S., Wang, K.H., and Park, C.B., "Challenge to the Manufacture of Low-Density Microcellular Polycarbonate Foams Using CO2”, SPE, ANTEC, Technical Papers, Paper #895, May 16-19, 2004.
- Lee, J.W.S., Wang, K.H., and Park, C.B., "Challenge to the Manufacture of Low-Density Microcellular Polycarbonate Foams Using scCO2", Polymer-Supercritical Fluid Systems and Foams, Tokyo, Japan, December 4-5, 2003.
PATENTS
- Lee W.S., Nam, G.J., and Shin, J.W., “Multi-Stage Die for Apparatus Evaluating Extrusion of Polymer”, KR 10-24895470000, 2023.
- Shin, J.W., Kim, J.S., Nam, G.J., Song, C.Y., Kook, K.H., and Lee W.S., “Heat Conduction Type Crosslinking Apparatus for Making a Cable”, KR 10-23514670000, 2022.
- Shin, J.W., Kim, J.S., Nam, G.J., Song, C.Y., Kook, K.H., and Lee W.S., “Continuous Crosslinking Apparatus for Making a Cable”, KR 10-23514660000, 2022.
- Nam, J.H., Lee W.S., Ryu, I.H., Yang, Y.S., Jung, H.J., and Lee, T.H., “Insulation composition having low dielectric constant, and cable including insulation layer formed therefrom”, US 10438716, 2019.
- Kim, S.K., Kim, J.S., Kim, W.K., and Lee W.S., “Resin Composition for Cable Sheath with Excellent Flame Retardancy”, KR 10-1914789, 2018.
- Ryu, I.H., Lee, J.I., Lee W.S., Lee, T.H., and Shin, J.W., “Halogen Free Flame Retardant Polyolefin Insulation Composition and Cable Having an Insulating Layer”, KR 10-1914869, 2018.
- Ryu, I.H., Lee, J.I., Lee W.S., Lee, T.H., and Shin, J.W., “Halogen Free Flame Retardant Crosslinked Polyolefin Insulation Wire”, KR 10-18489910000, 2018.
- Nam, J.H., Lee W.S., Ryu, I.H., Yang, Y.S., Jung, H.J., and Lee, T.H., “An Insulating Composition Having Low Dielectric Constant and Cable Comprising an Insulating Layer Formed from the Same”, PCT/KR provisional patent application filed, February, 2017.
- Kim, H.J., Lee, K.H, Lim, J.S., Kim, Y.H., Lee, I.H., and Lee W.S., “Method and Measurement Device for the Estimation of Extruded Orientated Characteristic in the Semi-Conductor Layers of Power Cables”, KR 10-1722238, 2017.
- Caudill, G.S., Inayat, B., Knerr, A.R., Stephens, J.D., Nishibuchi, K., DeTar, M.B., Lee, J., Lee W.S., Gronowski, B., “Insulated Winding Wire”, US 9,324,476 B2, 2016.
- Kim, H.J., Lee, K.H, Lim, J.S., Kim, Y.H., Park, N.R., Lee, I.H., and Lee W.S., “Diagnosis Method to Examine State of Power Cable Using Length Compensation”, KR 10-1649990, 2016.
- Yang, Y.S., Lee, I.H., and Lee W.S., “Power Cable Having a Semiconductive Layer”, KR 10-1457799, 2014.
- Yang, Y.S., Lee, I.H., and Lee W.S., “Conductive Filler, Conductive or Semiconductive Compound Comprising the Same, and Method for Preparing the Same”, KR 10-1431381, 2014.
- Park, Y.H., Nam, J.H., Cho, H.S., Kim, Y.J., Lee W.S., and Ryu, I.H., “Submarine Cable Having Improved Water-Proof Property”, KR 10-1358514, 2014.
- Lee W.S., Nam, J.H., Park, Y.H., Kim, Y.J., Ha, S.T., and Ryu, I.H., “Insulating Composition for DC Power Cable and DC Power Cable Prepared by Using the Same”, KR 10-1318457, 2013
TECHNICAL ARTICLES
- Lee, J.W.S., Wang, J., Park, C.B., and Tao G., “Use of Injection Speed Profile to Achieve A Uniform Void Fraction Distribution in Injection Molded Structural Foams”, “Spectator” Newsletter of the Ontario Section of the Society of Plastics Engineers, pp. 6-10, June 2009.
- Park, C.B., Lee, J.W.S., and Wang, J., “Advanced Structural Foam Molding Using Supercritical Fluid (SCF)”, Plastics Age, Vol. 54, August, pp. 108-113, 2008 (in Japanese)
CONFERENCE PRESENTATIONS & INDUSTRIAL SPONSOR MEETING PRESENTATIONS
- Lee, J.W.S., Shin, J.W., Choi, Y.J, Lee, S.H., and Cha, K.H., “Use of Pressure and Temperature Profile Inside an Extruder for Optimizing/Troubleshooting Extrusion Processes”, SPE, ANTEC, Technical Papers, Paper# T12-134, Orlando, FL, May 7-11, 2018.
- Lee, J.W.S., Shin, J.W., and Nam, G.J., “Processing Strategies in Twin Screw Extrusion for Halogen Free Wire & Cable Compounds”, Polymer Processing Society-31, Jeju Island, Korea, June 7-11, 2015.
- Lee W.S., “Polymer Processing in Cable Manufacturing Processes”, The 34th Conference of SPE (Society of Plastic Engineers) Korea, Daejeon, Korea, November 21, 2014.
- Lee W.S., Kim, J.S., and Nam, G.J., “Trends of New Technology in Telecommunication Cables”, Polymer Society of Korea, Daejeon, Korea, April 11, 2013.
- Nam, G.J., Lee W.S., Kim, J.S., “Development Trends of High Performance/High Value-Added Cable Using Foam Extrusion Process”, The Korean Society of Rheology Conference, Daejeon, Korea, November 19, 2010.
- Lee, J.W.S., Jung, P.U., Moon, Y.R., and Park, C.B., “Effect of Pressure on Foam Injection Molding”, The Korean Society of Rheology Conference, Yeoju, Korea, May 14-15, 2009.
- Lee, J.W.S., and Park, C.B., “Fundamental Foaming Mechanisms in Various Foam Injection Moldings”, Consortium for Cellular and Microcellular Plastics (CCMCP) Progress Review Meeting, Toronto, November 18-19, 2008.
- Lee, J.W.S., and Park, C.B., “Effect of Processing Condition on PET Foaming in Injection Molding Process”, Consortium for Cellular and Microcellular Plastics (CCMCP) Progress Review Meeting, Toronto, November 18-19, 2008.
- Lee, J.W.S., and Park, C.B., “Prediction of Achievable Cell Density in Advanced Structural Foam Molding Based on Foam Extrusion Results”, Consortium for Cellular and Microcellular Plastics (CCMCP) Progress Review Meeting, Toronto, November 18-19, 2008.
- Lee, J.W.S., and Park, C.B., “Challenge to Achieving a High Cell Density for Low Void Fraction Foams with Good Mechanical Properties”, Consortium for Cellular and Microcellular Plastics (CCMCP) Progress Review Meeting, Toronto, June 11-12, 2008
- Lee, J.W.S., and Park, C.B., “Effect of Gate Resistance on Injection Molded Structural Foams”, Consortium for Cellular and Microcellular Plastics (CCMCP) Progress Review Meeting, Toronto, June 11-12, 2008
- Lee, J.W.S., Wang, J., Yoon, J.D., and Park, C.B., “Effect of Cavity Pressure Profile on the Cell Morphology of the Injection-Molded HDPE Structural Foams”, SPE, ANTEC, Technical Papers, Paper #0542, Milwaukee, WI, May 4-6, 2008.
- Lee, J.W.S., and Park, C.B., “Effect of Processing Conditions on Advanced Structural Foam Molding with Gas Counter Pressure”, Consortium for Cellular and Microcellular Plastics (CCMCP), Toronto, Canada, December 5-6, 2007.
- Lee, J.W.S., and Park, C.B., “Effect of Pressure Profile in a Mold Cavity on the Cell Structure and the Void Fraction in Advanced Structural Foam Molding”, Consortium for Cellular and Microcellular Plastics (CCMCP), Toronto, Canada, June 19-20, 2007.
- Lee, J.W.S., Wang, J., Park, C.B., and Tao, G., “Use of Injection Speed Profile to Achieve A Uniform Void Fraction Distribution in Injection Molded Structural Foams”, SPE, ANTEC, Technical Papers, Paper #304236, Cincinnati, OH, May 6-10, 2007.
- Lee, J.W.S., and Park, C.B., “Control of Injection Speed Profile to Achieve a High Void Fraction in Structural Foam Molding”, Consortium for Cellular and Microcellular Plastics (CCMCP), Toronto, Canada, November 30-December 1, 2006.
- Park, C.B., and Lee, J.W.S., “Advanced Structural Foam Molding”, Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Toronto, Canada, June 26-27, 2006.
- Lee, J.W.S., Wang, J., Park, C.B., and Tao, G., “Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding”, SPI, Plastic Parts Innovations Conference, Memphis, Tennessee, April 1-3, 2006.
- Lee, J.W.S., and Park, C.B., “Fine-Celled Foaming of HDPE Using Nitrogen”, SPE, ANTEC, Technical Papers, Paper #103906, Charlotte, NC, May 7-11, 2006.
- Lee, J.W.S., and Park, C.B., “Use of N2 as a Blowing Agent for High Density Foams”, Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Toronto, Canada, December 1-2, 2005.
- Lee, J.W.S., and Park, C.B., “Foaming with N2 under Various N2 Contents, Pressure Drop Rates and Talc Contents”, Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Toronto, Canada, June 16-17, 2005.
- Lee, J.W.S., Wang, K.H., and Park, C.B., “Challenge to the Manufacture of Low-Density Microcellular Polycarbonate Foams Using CO2”, SPE, ANTEC, Technical Papers, Paper #895, May 16-19, 2004.
- Lee, J.W.S., and Park, C.B., “Microcellular Foaming Behavior of Branched Polycarbonate”, Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Toronto, Canada, November 4-5, 2004.
- Lee, J.W.S., and Park, C.B., “Microcellular Foaming Behavior of Polycarbonate”, Consortium for Cellular and Micro-Cellular Plastics (CCMCP), Toronto, Canada, March 4-5, 2004.
PROFESSIONAL ACADEMIC AND ADMINISTRATIVE EXPERIENCE
2011~2020 | Steering Committee Member, Society of Plastic Engineers (SPE) Korea Section, South Korea Leadership responsibility in organizing and steering SPE Korea Conferences |
2009~2010 | Newsletter Editor, Society of Plastic Engineers (SPE) Korea Section, South Korea Leadership responsibility in organizing SPE Korea Conferences |
2003~2008 | Co-Supervisor, Department of Mechanical and Industrial Engineering, University of Toronto, Canada Thesis Guidance for 4th-year and Master students |
PROFESSIONAL AFFILIATIONS
- Member of the Society of Plastics Engineering (SPE)
- Member of the Polymer Processing Society (PPS)
OTHER SKILLS & TRAINING
- Techno-MBA, LS Cable & System Ltd., 2016
- Six Sigma Mater Black Belt Project Leader, LS Cable & System Ltd., 2015
REFERENCES
Available Upon Request
- Design: HTML5 UP